How to use electric car polisher

Electric car polisher manufacturer and supplier in China

For car lovers, a shiny vehicle is not only a reflection of personal taste, but also a kind of care for the car. Electric car polisher with its convenience and efficiency has become one of the important tools of modern car beauty. If you are a beginner, this guide will take you step by step on how to wax and polish your car with an electric car polisher to give your car a new lease of life.
Step 1: Prepare
Before you start polishing and waxing, make sure your work area is clean and tidy, preferably in a cool place and out of direct sunlight. Also, get all the necessary tools and materials, including electric car polishers, polishing waxes, waxing products, polishing pads, cleaning cloths, buckets, and cleaners.
Step 2: Clean thoroughly
Use a high pressure water gun or hose to rinse the vehicle to remove dust and loose stains from the body surface. Then, the car is carefully washed with car wash liquid and sponges to ensure that every corner is cleaned. After cleaning, rinse the body with water and dry it with a clean towel or absorbent cloth.
Step 3: Check the body condition
After the vehicle is completely dry, carefully inspect the surface of the body and mark any scratches, oxidation spots or other blemishes that need to be addressed. This step helps you to be more targeted in the subsequent polishing process.
Step 4: Polish
Choose the right polishing pad and polish: Depending on the condition of the body surface, choose a coarse polish (for removing deeper scratches) or a fine polish (for light scratches and oxidation). Also, depending on the type of polish, choose a hard or soft polishing pad.
Install polishing pad: Install polishing pad correctly according to polishing machine instructions.
Apply polish: Squeeze a small amount of polish onto the polishing pad, or apply it directly to the body part that needs to be treated.
Start the electric car polisher: Connect the battery of the electric car polisher, adjust the appropriate speed (it is recommended that beginners start from low speed), and gently place the electric car polisher on the body surface.
Polishing: Move the electric car polisher in an "8" Shape or overlapping manner on the body surface to maintain a stable pressure and speed. When the polishing area becomes smooth and the polish is almost gone, stop polishing and check the effect.
Repeat the above steps: Until all the areas that need to be treated are satisfactory.
Step 5: Mirror treatment
After the rough polishing is completed, the surface is further refined with a mirror finish agent to eliminate small scratches and make the body surface smoother.
Step 6: Wax
Choose a waxing product: Choose from liquid wax, spray wax or solid wax according to your needs.
Apply the waxing product: Use a clean waxing cloth or special tool to evenly apply the wax to the car body, which can be tested in a small area first.
Wait for curing: According to the product instructions, wait for some time for the wax to cure.
Polishing polishing: Using a clean microfiber cloth or a special polishing cloth, gently polish the body in a painted circle until the wax is evenly distributed and a shine is formed.
Step 7: Check and organize
Finally, check the entire body carefully to make sure there are no missing areas. Organize the tools, clean the work area, and properly store the electric car polisher and its accessories.
Conclusion
Waxing and polishing a car with an electric car polisher is a process that is both scientific and artistic. With the increase of practice, you will become more proficient in electric car polisher, so that your car can show good condition after every beauty. Remember, safety always comes first, when using any power tools, please wear appropriate gloves and glasses to protect yourself from injury. I wish you a pleasant polishing and enjoy the fun of car beauty!